Uma Instruments

Greater Noida, Noida, Gautam Budh Nagar, Uttar Pradesh

GST No. 07BFCPD6162A1Z2

Send Email
Call 0804856017769% Response Rate

Home » Our Products » Tensile Testing Machine

Tensile Testing Machine

Leading Manufacturer of digital tensile testing machine, computerized tensile testing machine and de mattia flex tester from Noida.

Digital Tensile Testing Machine


Digital Tensile Testing Machine
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 40,000 / UnitGet Latest Price

Tensile Strength Tester (Digital Model) is used to determine breaking force of any fabric, Yarn Lea, HDPE Bag, Jute Bag, Board, Cable, plastic sheet, and wire. The reading directly comes in Kg (Kilogram Force). Elongation of material is also measured by the digital counter. TensileStrength Tester is based on the constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of the motor, gearbox and screw arrangement.


Technical Specification:

  • Capacity of Tester with capacity of 500kgf
  • Traverse Speed: fixed 100 300mm/min or Variable Spped 50 to 500 mm/min
  • Max. Grip Separation: 1000 mm
  • Min. Grip Separation: 25 mm
  • Motor: ½ HP Single phase 220V 50 Hz. ( for Capacity up to 100 Kgf )
  • Power: 220 V AC 50 Hz.
  • Safety Device: By Limit Switch to protect from Over Traverse.


Related Standards: ASTM D 434, D 1578, D 5034, D 5035, BS 1610, BSEN 1002 – 3, DIN 51221

Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    Computerized Tensile Testing Machine


    Computerized Tensile Testing Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.5 Lakh / UnitGet Latest Price

    Computerized Tensile Testing Machine is used to determine breaking force of any fabric, Non-Woven, HDPE Bag, Cable, Polymers, Rubber Sheet and wire Rope and Yarn Lea. Computerized Tensile Testing Machine is made of the finest material and thus produces very accurate and reliable results.

    Computerized Tensile Testing Machine consists of the lower stationary base plate, a fixed cross tie on two supporting columns and a movable crosshead using a lead screw and nut mechanism. The Tensile Testing Machine has been designed in such way that one testing space is suitable for the extra-long test sample, having long elongation.

    Technical Specification:
    • Capacity: 500 Kgf / 250Kgf
    • Accuracy: 0.100 Kg. (100g)
    • Display Unit: N/mm2, kg/Cm2, Pound
    • Operating System: Fully Automatic and Manual Both
    • Maximum Grip Separation: 1000mm
    • Motor: 0.5 hp , Crompton / ABB 220V AC 50 Hz
    • Display Units: Load, Speed, Elongation
    • Variable Speed: 50 to 500 mm /min
    • Calibration: Self-Calibrated


    Related Standards:
    ASTM D 434, ASTM D 1578, ASTM D 5034, ASTM D 5035, BS 1610, BSEN 1002 – 3, DIN 51221, IS 1608-1995
    Yes! I am Interested

    De Mattia Flex Tester


    De Mattia Flex Tester
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 75,000 / PieceGet Latest Price

    From our wide range of products, we offer optimum quality De Mattia Flex Tester. The entire array is designed using finest quality basic material and the advanced technology by our vendor's.

    • Precisely designed
    • Long service life
    • Low maintenance

    Rubber products have the ability to withstand repeated flexing without developing cracks. This quality is of prime importance where such products are used in conditions where they under repeated flexing. De-Mattia Flex tester is used to determine the Flexing endurance of rubber products. The instrument works by simulating the action of repeated flexing under standard conditions of speed, mode, and degree of flexing in the laboratory. Using the De Mattia Flex tester is one of the internationally accepted procedures for the determination of flexing resistance.

    Esteemed clients can avail from us an extensive array of De Mattia Flex Testers, which is designed with a set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. For providing flexing and unflexing actions the test specimen is loaded with a fixed grip from one end and other in a reciprocating grip.

    Technical Specification:
    • Number of test specimens tested: Six (or Twelve)
    • Maximum opening between grips: 75 mm (adjustable)
    • Travel of reciprocating grip: 57.15 mm (adjustable)
    • Flexing frequency: 300 Hz
    • Motor: ¼HP single phase 230 V AC
    Yes! I am Interested


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Manish Dwivedi (Director)
    Uma Instruments
    A 2/66,SITE V, Kasna Industrial Area, Surajpur, Gautam Budh Nagar, Greater Noida
    Noida - 201308, Gautam Budh Nagar, Uttar Pradesh, India
    Call Us: 
    Call Response Rate: 69%
    Share Us :

    Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

    © Uma Instruments. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Uma Instruments